Furman LC-X Compressor (B Stock)

£60.00

In stock

Description

B Stock:  See Condition tab for more information on this item

Sold as seen, no returns on B Stock items


Furman is not well known in the UK but is a big name in the USA for their power management products. The LC-X is one of their vintage units and dates back to the mid-1980s. It’s a FET-based compressor with a big, aggressive sound and lots of mojo

The LC-X combines a single-channel expander, compressor and limiter in one chassis. Each section has its own controls and the result is a punchy, flexible compressor / limiter with lots of attitude. It comes complete with sidechain send & return (labelled sidechain output & input) and a socket for stereo linking. Using the sidechain with an outboard EQ is definitely to be experimented with!

The expander has ratio & threshold controls and works effectively. It has a smoother, subtler effect than a gate and is ideal for reducing background noise from loud guitar amps. The 1:1 ratio setting is marked “off”

The compressor also has ratio & threshold settings. Careful setting of these two will dial the compressor into a sweet spot where the compression as inaudible – or as obnoxious – as you want. Lower thresholds result in aggressive pumping and this can be accentuated or reduced by adjusting the ratio. Compression ratio is variable from 1:1 (off) to limit (>8:1). In my tests I found 2 or 3:1 to be ideal for creating obvious compression without flattening the signal completely

Attack & release time are separately adjustable. It’s not immediately obvious if these controls apply to both compression & expansion but I assume they do. Fast attack neuters transients very effectively and, with short attack & release times, can be used to completely change the character of percussive signals. Longer attack times give the traditional hard attack followed by compression and is the key to making the LC-X pump

Final trick in the box is the limiter. This throws subtlety completely out of the window… It has one control, an output limit setting, and can reduce drums to a smoking ruin. Between this and the compressor there’s a whole world of massive compression – and huge distortion – to explore

This is the first FET compressor I’ve played with for a while. FETs tend to generate more distortion than VCAs but, as the distortion is level-dependent, it often adds excitement & edge to the signal. In this respect, the LC-X is not as refined or accomplished as a UREI 1176 but it is definitely heading in the same direction. If you like compressors with aggression – like I do – the LC-X will be right up your street.

The LC-X is ideal for drum ambience, drum busses or anything that benefits from heavy compression. It’s also brilliant for electric guitars as it adds “hair” and bite

The LC-X has the tough 1U steel case typical of American products. Internal construction is simple with a single PCB & through-hole components so it will be repairable in the future. Most of the circuitry is TL072 opamps but there are plenty of transistors and pairs of FETs for the gain reduction elements. If you want a compressor to hot rod the LC-X is ideal - beefiier power supply regulation, better decoupling and modern electrolytic caps will improve it dramatically The unit has balanced inputs & outputs on XLRs. I suspect it is wired pin 3 hot. High and low-level inputs & outputs are provided on mono jack sockets, as are stereo linking and sidechain input & output Mains input is 110 Volts and has an earth lift switch, internal power fuse and a short, fixed 2-core cable with a US plug.
1U form factor for standard 19" rack fitment. 110 Volt
1U
Tested, powers up OK. Passes signal but distorts when compressing. Controls & limiter work OK Photos do not show the item for sale - they show a compressor sold previously B Stock items are sold as-seen with no returns. They have been tested, and a brief description of the faults or damage is given, but they may have other faults and may not test the same in future In good cosmetic condition