dbx 120A Stereo Subharmonic Synthesiser #11

£250.00

This is an unusual piece of kit, even by outboard gear standards. The dbx 120A is a Subharmonic Synthesizer which generates low frequency subharmonics to increase bass output

Out of stock

Email me when in stock

Description

This is an unusual piece of kit, even by outboard gear standards. The dbx 120A is a Subharmonic Synthesizer which generates low frequency subharmonics to increase bass output. It’s designed to enhance the low end by adding really low frequencies that doesn’t exist in the original signal. So, unlike enhancers or EQ which work with what’s already there, the 120A generates additional subharmonics to add to the signal

The 120A can be used on an insert – it has stereo inputs & outputs – or on a send with the return coming from the subwoofer output. It’s capable of generating large amounts of subharmonics so needs to be used with a degree of caution!

dbx has made a number of subharmonic synthesisers which are all basically similar. The 120A and 120XP are probably the best known and the 120A is a current product. They’re popular on film post stages for generating subharmonic rumbles for movie effects

I spent a while playing with the Subharmonic Synthesiser. It surprised me how effective it was and how much excitement it could add to a mix. It’s an easy effect to overdo, particularly when monitoring on small speakers when the true effect can’t be felt. Pulling the grilles off your speakers and switching the 120 in and out is instructive – with it switched in, you can see the bass cones flapping around like crazy if you’ve overdone it

To be used with caution on mixes, with care on sound effects, and with reckless abandon on big PA rigs. The 120A is one of the best toys I’ve played with in years. Useful for adding that ultra-low end in a mix, beefing up wimpy samples, or for adding rumble to a PA setup. The 120A will make things wobble!

In very good, used condition with a few paint chips on the edge of the front panel. Tested & working 100%. Photos show the dbx 120A for sale

Front panel controls include output level controls for the 24-36 Hz & 36-56 Hz bands, LF boost and subharmonic levels. There's also an output level control and a switchable crossover for the dedicated subwoofer output. Inputs and outputs are on standard jack sockets. Inputs are balanced, outputs unbalanced. Maximum input & output levels are +20 dB so the 120A will work in a +4 or -10 dB setup

1U device suitable for mounting in a standard 19" rack. 200-240 Volt AC input with standard IEC power connector. IEC power cable supplied on request

Product Page

http://dbxpro.com/en-US/products/120a

Owners manual

http://rdn.harmanpro.com/product_documents/documents/382_1323451227/120A%20Manual%2018-2217-C_original.pdf

Sound on Sound Review (of 120XP)

http://www.soundonsound.com/sos/1994_articles/mar94/dbx120xp.html

1U

In very good, used condition with a few paint chips on the edge of the front panel. Tested & working 100%. Photos show the dbx 120A for sale